| Standard Injection Gated Manifold manifold systems are robust and efficient. Engineered with ‘screw-in’ drops in mind, this design is the most durable and reliable manifold system in the field today. |
|
||
| Various ‘tip’ styles are available. Standard Sprues, External Low Vestige, Internal Low Vestige and External Minimal Vestige tips allow effective gating conditions.
Depending on the part material and melt temp, these tips and inserts are machined from various materials such as; hardened steel, stainless steel and titanium. |
|
||
|
|
|
|
|
| PHRS 1 shot size 5.0 lbs. |
PHRS 2 shot size 1.0-5.0 lbs. |
PHRS 3 shot size .50-1.0 lb. |
PHRS 4 shot size up o .50 lb |
PHRS 5 shot size up to .50 lb. |
PHRS 6 shot size up to .50 lb. |
|
|---|---|---|---|---|---|---|
| Down Size Systems | Full Size Systems | |||||
| Cap-O.D. | 1.00″ | 20mm/1.00″ | .75″/20mm | 15mm/.625″/.75″ | 12mm/16mm | 8mm/12mm |
| O-hole_dia. | .250″ | .156″ | .156″ | .120″ (3mm) | .0787″ (2mm) | .060″ (1.5mm) |
| .210″ | .210″ | .156″ (4mm) | .120″ (3mm) | 0.787″ (2mm) | ||
| .250″ | ||||||
| Max. Surf. Contour at Parting Line |
12° (.250″dia o-hole) | 20° (.156″ dia o-hole) | 12° (.156″ dia o-hole) | 18° (.120″ dia o-hole) | 12° (2mm dia o-hole) | 12° (1.5mm dia o-hole) |
| 12° (.210″ dia o-hole) | 0° (.210″ dia o-hole) | 0° (.156″ dia o-hole) | 6° (3mm dia o-hole) | 6° (2.0mm dia o-hole) | ||
| 20° (.250″ dia o-hole) | ||||||